• Rectangular, adjustable legs with leg pins
• Three stainless steel swivel eye bolt anchor points
• One stainless steel double-grooved pulley accommodates 8mm steel wire rope and fibre rope up to 13mm
• Each leg includes a stabilisation attachment point
• Upgraded Standard feet suits both flat and uneven surfaces, pivot to adjust to ground variations and incorporate an aggressive non-slip tread pattern
• Bridge beam includes a trolley, trolley-positioning line, and heads
In the Box
• 3 x Standard Legs feature rated load attachment points that swivel 360 degrees, along with an additional D-shackle attachment point for stabilisation rigging
• 1 x Pulley Leg incorporates a pulley designed to accommodate up to 13 mm fibre rope as well as up to 8 mm steel/stainless steel wire cable rope
• 1 x Bridge Beam - 2m, 3m or 4m length
• 1 x Quad Plate (accessory)
• 2 x Feet Rope and Rope Grab
• 1 x Transport Bag
• 1 x Bridge Bag
The Standard Bridge system can be Configured into:
• Tripod
• Quadpod (Quad Plate required - supplied)
• A-Frame (Rigging Plate required - sold separately)
• Sideways A--Frame (Rigging Plate - sold separately)
• Handrail Recovery Monopole
• Bridge System
Specifications
| Bridge System
|
Max. Inside Clearance Height | 2696mm |
Inside Feet Footprint | 2m System: 3346mm x 2171mm 3m System: 4346mm x 2171mm 4m System: 5346mm x 2171mm |
Configured Device Weight | 2m System: 57 kg 3m System: 64 kg 4m System: 71 kg |
WLL External Anchor Point | At max. height and mid-beam 2m System: 28kN ** 3m System: 23kN ** 4m System: 19kN ** **Bridge Beam MBS will differ depending on where the load is positioned along the beam. |
Minimum Breaking Strength | At max. height and mid-beam 2m System: 28kN ** 3m System: 23kN ** 4m System: 19kN ** **Bridge Beam MBS will differ depending on where the load is positioned along the beam. |
WLL Load Anchored to Le |